JVC GSTD1BUS manual Playing Back with a DVD Writer

Copying

12 Press and hold the M button for 2 seconds or more to turn off this unit and disconnect the USB cable.

Caution :

0Do not turn off the power or remove the USB cable until copying is complete.

0Files that are not on the index screen during playback cannot be copied.

Memo :

0To check the created disc, refer to “Playing Back with a DVD Writer”. “Playing Back with a DVD Writer” (A p. 77)

When “DO YOU WANT TO FINALIZE?” appears

This appears when “AUTO FINALIZE” in the basic settings menu is set to OFF.

“AUTO FINALIZE” (A p. 129)

0To play back on other devices, tap “YES”.

0To add more files to the DVD later, tap “NO”.

Memo :

0When two or more DVDs are created simultaneously, all the discs other than the last one will be finalized automatically even when “AUTO FINALIZE” is set to “OFF”.

0You can finalize a DVD even when “FINALIZE” is selected in the “BACK- UP” menu.

“Finalizing Discs After Copying” (A p. 78)

0To play back a BD-R disc on other devices, select “FINALIZE” after creating the disc.

(The “AUTO FINALIZE” function on the basic settings menu can only be used for creating DVDs.)

Playing Back with a DVD Writer

You can play back the DVDs created on this unit.

1Prepare a DVD writer.

0 Insert the DVD to play back into the DVD writer. “Preparing a DVD Writer (CU-VD50U)” (A p. 73) “Preparing a DVD Writer (CU-VD3U)” (A p. 73)

2Tap “PLAYBACK” in the BACK-UP menu.

0An index screen (thumbnail display) of the videos in the disc appears.

0Tap “J” to return to the “BACK-UP” menu.

0Images recorded in 3D mode and 2D mode are displayed on the index screen separately. Press the 3D button to switch to the desired mode for playback.

0During 3D mode, “3D” is displayed on the LCD monitor.

0During 2D mode, “2D” is displayed on the LCD monitor.

3Tap on the file to start playback.

0For details on video playback, refer to ““Operation Buttons for Video Playback” (A p. 53) ”.

“Operation Buttons for Video Playback” (A p. 53)

0To exit, stop playback and turn off the camcorder by pressing the M button for about 2 seconds. Then, disconnect the USB cable.

Memo :

03D images may be played back when the 3D button lights up.

0Scenes that are likely to cause motion sickness during 3D playback may be played back in stop-motion, but this is not a malfunction. To play back normally, set “3D MOTION RELIEF” to “OFF”.

“3D MOTION RELIEF (3D mode only)” (A p. 117)

0When playing back a disc created in DVD-Video format, no information such as date and time will be displayed.

77