Leica 1000Z01 user manual Height, If set to Inter, the Line / a option is

Rec Diff : Set to NONE, no additional measurement is recorded.

Set to O the program will record Δ Offset values only.

Set to O/ L, the program will record both Δ Offset and Δ Line values.

Set to O/L/H, the program will record

ΔOffset, D Line and ΔHeight of target values.

If the option "Height" is set to

"Inter" you can in addition calculate the values:

Set to O/S the program will record both Δ Offset and Δ Spatial distance values.

Set to O/S/P, the program will record

ΔOffset, Δ Spatial distance and

ΔPerp.length of the perpendicular line. (Refer to figure page 94)

User Disp	: Set to YES, the display defined in the
	MEAS application will be used.
	If set to NO, the "REFERENCE
	LINE" default display applies.
Height	: Set to Ref, Δ Height (1) will be
	calculated from the first base point
	and the reflector.
	Set to Inter, the program will
	calculate Δ Height (2) from the
	interpolated height of the base line at
	Δ Line of the reflector position and
	the reflector position itself.
	If set to Inter, the Line / a option is
	set to NO automatically.
Log File	: Set to ON, the program will record
	measurement data in a log file in the
	format described on page 103.

Log FlName : Enter the Log File Name.

102 TPS-System 1000 Programs-2.3.1en © Leica