Leica 1000Z01 user manual Target Point, Enter the target point number and height of the reflector

Target Point	Enter the target point number and height of the reflector
	.

ORINT\ TARGET POINT		14:03
Point no. :
	12
Refl.Height :	1.300		m

MC

CALC LIST <-- -->

HELP CONF

F1 F2 F3 F4 F5

F6

Run the calculation. Note, the key will be assigned after the first measurement.

Entry of target points into a list as well as selecting points for further use.

Displays the previous point from the list of points entered. Note that this key will not be available until there is at least one point in the list.

Displays the next point in the list of points entered. Note that this key will not be available until there is at least one point in the list.

Retrieve the coordinates of the target point from the selected file. For further information, please refer to dialog "IMPORT" described in the "System" - user manual.

Start the "CONFIGURATION"

28 TPS-System 1000 Programs-2.3.1en © Leica