Leica 1000Z01 Angle from the first auxiliary point to, Stakeout point, To the stakeout point

Hz Angle 1	: Angle from the first auxiliary point to
	the stakeout point.
Dist 1	: Distance from the first auxiliary point
	to the stakeout point.
Hz Angle 2	: Angle from the second auxiliary point
	to the stakeout point.
Dist 2	: Distance from the second auxiliary
	point to the stakeout point.

ΔHeight : Difference in height between the last measured reflector point and the stakeout point. Positive in sign if stakeout point is higher than the

reflector position. SO

Simultaneously measure and record data on the active recording device.

Measure a distance.

Record the measurement on the active recording device.

Enter target data as described in chapter "Measure & Record" of "System" - user manual.

Re-position the telescope on the target. Note, this function is only available for motorized theodolites.

Change stakeout method. For more information refer to chapter "Select Stakeout Method".

Generate a plot of the stakeout data. For more information refer to chapter "Plot".

Exit the program.

Acquire the next point to stake.

© Leica TPS-System 1000 Programs-2.3.1en 71