Leica 1000Z01 user manual Designation of keys, Target eccentricity

Designation of keys

"REC"

Target eccentricity

The effects of the fixed keys and of a few function keys are the same as their effects in "MEASURE AND RECORD". These keys are generally omitted from the descriptions of the applications and from the ON-LINE help.

Continues sequence after input, measurements etc. have been concluded. If the measurement dialog is concluded

with the measurement data will not be recorded.

Erases incorrect alphanumeric input.

Records in a pre-established format manually-entered coordinates, measurements or the results of calculations.

Quits current dialog and calls up previous dialog. Changes and inputs to dialog are rejected and are not stored.

Displays the second level of the function keys -

.

Calls ON-LINE help.

Closes application.

Calls up code input or code function in measurement dialog.

If the reflector cannot be set up directly over the desired point, or if the point cannot be seen from the instrument, the function 'OFFS' may be used to make an offset measurement.

Previous to the input of the values for eccentricity, a distance must be measured to the reflector.

For more information, please refer to section 'Measurement & recording' of 'System'-user manual.

26 TPS-System 1000 Programs-2.3.1en © Leica