Leica 1000Z01 user manual Alignment V-alignment definition = V-alignment

The project start is at the nadir. After the first straight there follows a left curve, then a right curve. There are also spirals and a straight between the arcs.

The cross sections are assigned as follows:

Straight	Tmpl0125
Left curve	Tmpl0123
Right curve	Tmpl0124

The last character at the end of each data line must be a space (ASCII character 32).

WI 11 and WI 41: The block number is located from position 3 to 6.

• V-alignment

The V-alignment definition (= V-alignment)

The V-alignment is defined with the main points (1 - 6). The main points form the starting and finishing points

PROG_Z23

	Parabola
		-p
Parabola
+p	4	5
1	3	6
2
Straight	Straight	Straight	RO

of the geometrical elements. The starting point of one element is also the finishing point of the previous element.

© Leica TPS-System 1000 Programs-2.3.1en 197