Leica 1000Z01 user manual 242

or

Explanation of the polarity rule of L and Q

During entering, the polarity is based on the straight line 1 -> 2.

+Q Parallel displacement to the right - Q Parallel displacement to the left

+L Displacement from basis point 1 in the direction of basis point 2

- L Displacement from basis point 1 in the opposite direction to basis point 2

Call up the function in the menu "OFFSETS".

COGO\ BASELINE START PT. 14:03

Rec. device			: Memory Card						MC
Search in		:		FILE01.GSI
Point/Code		:
					58
INPUT		MEAS			SEARC		αNUM
HELP
F1	F2		F3		F4		F5		F6

Manual entering of the baseline start point (or the baseline end point). The standard TPS 1000 input dialog box appears.

Measuring the baseline start point (or the baseline end point). This function is described in chapter "Measure

&Record" (Measurement dialogue) of the "System"- user manual.

Search for the coordinates of baseline start point (or the baseline end point) in the coordinate file. This function is described in chapter "Setup" (Import function) of the "System"-user manual.

Exit the program.

242 TPS-System 1000 Programs-2.3.1en © Leica