Leica 1000Z01 user manual TIED\ First Point

Measure Mode

This dialog is used in accordance with the settings of the system function "Measure & Record" or according to the dialog shown below.

TIED\	FIRST POINT					14:03
Point no.		:		546				MC
Refl.Height :				1.654			m
Hz		:	230°45'23"
V		:		4°52'35"
Slope Dist. :				-----			m
Height diff :				-----			m
ALL	DIST		REC	TARGT	IMPOR
Easting		:		-----			m
Northing		:		-----			m
									TD
Elevation		:		-----			m
HELP	CONF			I<>II
F1	F2		F3	F4			F5	F6

The input for the start point is only possible after the

program start or with the function in the dialog "RADIAL MODE".

For all following points the program requests (NEXT POINT).

The dialog for the following points is identical with dialog above, except for the title.

Simultaneously measure and record in the active file. Proceed with the dialog "NEXT POINT". If the second point has already been measured, the program will proceed to the "RESULT" dialog.

Measure a distance. Record the measurement in the active file and proceed with the dialog "NEXT POINT". If the second point has already been measured, the program will proceed to the "RESULT" dialog.

Measure the distance. Accept the measurement without recording. If the second point has already been measured, the program will proceed with the "RESULT" dialog.

© Leica TPS-System 1000 Programs-2.3.1en 51