Leica 1000Z01 user manual Offset, Access the cross section options

Select Template point and The first step in the procedure is to select a point on the

offset	cross section to be staked and enter the offset.
	Access the cross section options.

ROAD+\ CROSS SECTIONS							14:03
							1L
Chainage			:			0.000
Hght. Shift			:			0.000		m
Template			:		+000tutor
ΔCL Offset			:		-1.500			m
ΔCL Hgt Diff :					-0.030			m
	CATCH	<-	CENTR		->
Stake Offs.			:		-0.600			m
S.Offset Ht			:	Horizontal
Offset			:			0.000		m
Hght Offset			:			0.000		m
HELP					PLOT
	F1	F2		F3		F4		F5

MC

F6

1L: Indicates the location of the cross section point in relation to the centerline. In this example, the "1L" means the first point of the template left of centerline.

Chainage : Displays the current chainage.

Hght. Shift : Displays the vertical shift, if any, applied to the whole alignment.

Template : Displays the template name being used.

ΔCL Offset : Displays the horizontal distance of the template point from centerline (- for left)

ΔCL Hgt Diff : Displays the difference in elevation of the template point between the centerline and the point to be staked.

270 TPS-System 1000 Programs-2.3.1en © Leica