Leica 1000Z01 user manual Interpolated, Horizontal offset to apply to current

Stake Offs. : This is the offset value that will be used for setting the offset stake. If the point is left of centerline, the value entered must be a negative number.

S. Offset Ht : This display indicates the method used in computing the elevation of the point

	to be staked. The three methods are
	"PREVIOUS ELEMENT",
	"INTERPOLATED" and
	"HORIZONTAL".
Offset	: Horizontal offset to apply to current
	chainage.

Hght Offset : Vertical offset to apply to current chainage.

Activates the slope staking options

Move along the current cross section from right to left.

Sets the cross section point to the centerline

Move across the current cross section from left to right

Displays a plot of the template.

The first point we want to stake for the bike path is the left edge of pavement. This point is 1.5 m left of centerline so the "ΔCL Offset" value should be set to a -1.5 m.

RP

Change the location to -1.5 m. The "ΔCL Hght Diff" value will automatically change to the correct vertical difference based upon the design of the template.

© Leica TPS-System 1000 Programs-2.3.1en 271