Leica 1000Z01 user manual Cross sections, Aspect Chainage increasing

• Cross sections

The points in the cross section are defined in accordance with:

-the centre-line offset sCLO (neg.: pt. left / pos.: pt. right) and

-the height difference sH related to the alignment point (neg.: pt. lower / pos.: pt. higher than alignment)

PROG_Z24

	alignment
left		right
1	3	sCLO (pos.)
2		sΔH (neg.)

4

5

Aspect:

chainage increasing

Element	Defined by:	Declaration
Height difference	Planned height difference	-
	with respect to alignment
Centerline offset	Planned centre-line offset	-

The template file is structured as follows: RO

1.Header

2.Data block: Cross section 1 / point no. 1

3.Data block: Cross section 2 / point no. 2

4.Data block: Cross section 3 / point no. 3

.....

n. Data block: Cross section x / point no. y

© Leica TPS-System 1000 Programs-2.3.1en 201