Leica 1000Z01 Alignment, Selection of files, Out or inspected in two dimensions. Without

Alignment

Selection of files	The files with the definitions for the Hz-alignment, the
	V-alignment and the cross sections are selected. The
	names of the files must be in accordance with the
	guidelines laid down in section "Introduction".
	The Hz-alignment must always be selected. The choice
	of a V-alignment and of transverse sections is optional.
	If no V-alignment is selected, points can only be set
	out or inspected in two dimensions. Without V-
	alignments, no transverse sections can be selected.

ROADL\ SELECT ALN FILES 14:03

Horiz.Aln.	:	ALNTEMP
Vert. Aln.	:	PRFTEMP
Cross Secs	:	CRSTEMP
Log FlName	:	ROAD.LOG

MC

HELP CONF

F1 F2 F3 F4 F5

F6

Horiz.Aln : Selects definition of Hz-alignment.

Vert. Aln : Selects definition of gradient (optio- nal)

Cross Secs : Selects definition of cross section.

(optional)

RO

Log FlName : Name of the log file in use.

Start the "Configuration".

Continues with dialog "CHECKING FILES".

© Leica TPS-System 1000 Programs-2.3.1en 175