Leica 1000Z01 user manual Puoint no

Measure a Base Point This dialog is used in accordance with the settings of the system function "Measure & Record" or according to the dialog shown below.

REFLN\ REFERENCE LINE									14:03
Puoint no. :									12
Hz		:					286°55'50"
V		:			91°16'20"
Refl.Height :								1.500		m
Slope Dist. :					22.039					m
Height diff :								2.543		m
ALL			DIST	REC		TARGT
HELP						I<>II
	F1		F2	F3				F4		F5

MC

F6

Simultaneously measure and record in the active file. Proceed with the dialog "1 POINT BASELINE" (page 95). If the second point has already been measured, the program will proceed to the "DEFINE REF LINE" dialog.

Measure a distance.

Record the measurement in the active file and proceed with the dialog "1 POINT BASELINE" (page 95). If the second point has already been measured, the program will proceed to the "DEFINE REF LINE" dialog.

Measure the distance. Accept the measurement without recording. If the second point has already been measured, the program will proceed with the "DEFINE REF LINE" dialog.

Enter the target data. For further information refer to chapter "Measure & Record" of "SYSTEM" - user manual.

96 TPS-System 1000 Programs-2.3.1en © Leica