Leica 1000Z01 user manual For each section of the area, start, Point and end point, horizontal

Log File	If "Log File" is set to ON the measurements and the
	results are stored in the ASCII-file specified within the
	"Configuration Editor". This file is created in the
	directory LOG on the memory card. Subsequently, you
	can read the memory card on your PC and obtain a hard
	copy of the Log-file.
	Data will always be appended to the specified Log-file.
	The Log-file contains the following information:
	Header	The header line will contain the
		program used, information about the
		instrument, the name of the data file as
		well as date and time.
	Record	For each section of the area, start
		point and end point, horizontal
		distance and azimuth are stored.

For arcs with 2 points and radius the azimuth of arc, radius and length of arc are also stored.

AR

For 3 point arcs the direction of arc, radius and length of arc are also stored.

© Leica TPS-System 1000 Programs-2.3.1en 127