Leica 1000Z01 user manual Check Xsec Help

ROAD+\ CHAINAGE & OFFSET 14:03

Chainage		:		0.000
Element		:				POB
Offset		:		0.000			m
Hght Offset		:		0.000			m
								EDIT
CHECK	CH-->		<--CH		XSEC
HELP

MC

F1

F2

F3

F4

F5

F6

Moves to the next chainage (you also may enter a chainage). The chainage and offset display will change to reflect the new chainage location.

Brings up the "CROSS SECTIONS" display.

ROAD+\ CROSS SECTIONS							14:03
							1R
Chainage			:		25.000
Template			:		+000tutor
ΔCL Offset			:			1.500		m
ΔCL Hgt Diff :					-0.030			m
Stake Offs.			:			0.600		m
	CATCH	<-		CENTR	->
HELP
	F1	F2		F3		F4		F5

MC

F6

In our example the last point staked was on the right side. Rather than have the rod person cross back over to the left side, it makes sense to stay on the right side and stake that position and then cross over to the left side. To stake the catch point on the right side:

RP

Set the "ΔCL Offset" from centerline value to positive 1.500 m. The offset value should be positive 0.600 m, but should not require a change because that was the last offset value used for the previous right side point.

Access the "POINT COORDS" display.

© Leica TPS-System 1000 Programs-2.3.1en 277