Leica 1000Z01 user manual Orientation and Height Transfer, Introduction

Orientation and Height Transfer

Introduction	This manual describes the "Orientation and Height
	Transfer" program of the TPS SYSTEM 1000
	theodolite series.
	0°00'00"

H

PROG_Z01

OH

	N	Hz
		E	H
		ΔH	N
E0		H0
	N0
			E

The instrument must be set up on a known point. The program "ORIENTATION" calculates an angular correction for the instruments horizontal circle, so that 0.0000 of the horizontal circle corresponds with grid north (Orientation correction), using reference points with known Easting and Northing.

For simultaneous determination of the station elevation, height of instrument and height of reflector must already have been input and the elevation of the target points must be known.

The program handles a maximum of 10 points.

© Leica TPS-System 1000 Programs-2.3.1en 27