Leica 1000Z01 user manual Vertical Alignment, Tangent Coordinate Km,H to Coordinate Km,H

Vertical Alignment		Geometric elements supported:
Element	Definition		Declaration in the
			Alignment file
Tangent	Coordinate (Km,H) to Coordinate (Km,H)		"STRAIGHT"
Circular curve	beginning of curve(Km,H), Radius,		"000CURVE"
	end of curve (Km,H);
Parabola	Coordinate (Km,H), Parabola parameter /		"0PARABOL"
	Parabola length;
End of project	Coordinate (Km,H)		"00000EOP"

Vertical Alignment File Header:

41....+000JOBID 42....+0VALIGNM 43......+STACOORD

WI 41 Job-Identification. Max. 8 ASCII-characters, may be defined by user.

WI 42 Identification of Vertical Alignment file. May not be changed by user.

WI 43 Identification of principal point type file. May not be changed by user.

Example for a data block for a vertical alignment point:

11....+KILOMETR 71....+0NEXTGEO 72....+0NEXTRAD 83..10+00000000

WI 11 Chainage of a vertical alignment point

WI71 Type of the following geometric element

WI72 Radius of the following geometric element or parabola parameter

WI83 Elevation of the point

294 TPS-System 1000 Programs-2.3.1en © Leica