Leica 1000Z01 user manual Alpha

Define Reference Line The reference line can be defined by entering a distance value, a line offset value and an angle value for the base line. Heights can be changed by a constant rate (eg, 1m) by entering a H offset value.

or

REFLN\ DEFINE REF LINE 14:03

1.BasePoint :				12				MC
2.BasePoint :				13
Offset		:			1.000		m
Line		:			1.558		m
Alpha		:		2°03'39"
H Offset		:		0.500			m
	NEWL			MEAS
HELP
F1		F2	F3		F4	F5		F6

1.BasePoint : The first base point that defines the base line.

2.BasePoint : The second base point that defines the

	base line.
Offset	: Establishes the displacement parallel
	to the base line.
Line	: Establishes the distance from the first
	reference point to the starting point of
	the new reference line.
Alpha	: Establishes the angle between the base
	line and the new reference line.
H Offset	: Displaces the base line parallel in
	height.

Define a new base line.

Accept parameters as displayed and proceed to the "RESULT REF LINE" dialog.

98 TPS-System 1000 Programs-2.3.1en © Leica