Leica 1000Z01 user manual Cross Section Assignments, Elements supported Definition

Cross Section Assignments

Elements supported.

Element	Definition
Cross Section	The number or identifier of the
number	cross section
Chainage	The chainage from which the
	cross section is applied

Header of the Cross Section Assignment file:

410001+000asker 42..10+ASSIGNMT 43....+CRSASKER

WI41 Job identification. Max. 8 ASCII characters, user definable.

WI42 Cross section assignment file identification.

May not be changed by user.

WI43 Name of the corresponding cross section file

A data block for a cross section assignment is structured as follows:

110002+0000NORM 71....+00382000

WI 11 The cross section number.

WI 71 Beginning chainage for that cross section

Comments:

•The header consists of a single block at the start of a data file.

•A cross section assignment file must have a corresponding cross section file.

•A cross section remains valid until a new cross section is assigned.

•A given cross section may be assigned to multiple chainage.

•The units for chainage are defined in WI 42 in the file header.

•For a cross section assignment file there is a limitation of 100 data blocks.

298 TPS-System 1000 Programs-2.3.1en © Leica