Leica 1000Z01 Measure Base Point, Point number of the base point, Point to the base point

Measure Base Point

This dialog is used in accordance with the settings of the system function "Measure & Record" or according to the dialog shown below.

REMHT\ MEASURE BASE PT 14:03

Point no. :

Hz:

V:

Refl.Height : Slope Dist. : Height diff :

ALL DIST REC

HELP CONF

Station12
16°55'50"
91°16'20"
1.664	m
-----	m
-----

TARGT REMOT I<>II

MC

αNUM

F1 F2 F3 F4 F5 F6

Point No.	: The point number of the base point.
Hz	: Horizontal direction from the remote
	point to the base point.
V	: Vertical angle to the remote point.

Refl.Height : Reflector height used for the target point.

Slope dist. : Slope distance from the instrument station to the base point.

Height diff : Height difference between the base point ground and the instrument ground.

Simultaneously measure and record in the active file. Proceed with the "REMOTE POINT" dialog.

Measure a distance. Record the measurement in the active file and proceed with the "REMOTE POINT" dialog.

Measure the distance. Accept the measurement without recording. Proceed with the "REMOTE POINT" dialog.

106 TPS-System 1000 Programs-2.3.1en © Leica