Leica 1000Z01 user manual Measurement

Log File	If "Log File" is set to ON the measurements and the
	results are stored in the ASCII-file specified within the
	"Configuration Editor". This file is created in the
	directory LOG on the memory card. Subsequently, you
	can read the memory card on your PC and obtain a hard
	copy of the Log-file.
	Data will always be appended to the specified Log-file.
	The Log-file contains the following information:
	Header	includes:
		- the program used,
		- information about the instrument,
		- the file to store the measurement
		data,
		- the date and the time.
	Configuration	the name of the input files for:
		- the Hz-alignment,
		- the V-alignment and
		- the transverse section.
	Measurement	- Instrument station with coordinates
		and instrument height.

- Stakeout point with chainage,

- offset1 and height displacement2 relative to centre line,

- comparison values from planning, and associated differences.

For the alignment inspection, - the coordinates of the point

measured are stored along with - the associated station,

- the offset and

- the height difference.

190 TPS-System 1000 Programs-2.3.1en © Leica