Supplemental Instruction
Thank you for purchasing the Mitsubishi Industrial Robot MELFA Series.
This document additionally explains to the Mitsubishi Industrial Robot
Therefore, check the content, and use it together with your instruction manual.
1. Outline
When lubricating, removal of the drain bolt or the plug is unnecessary.
The robot which is the target of these supplementary contents is shown below.
No. | Target products |
1Produced in September,
2006 and afterwards.
2Produced before August,
2006.
The discrimination method
The DATE columns of the rated plate of the robot arm are all the robots after
The robot by which the blue round sticker is stuck on the rated plate of the robot arm.
2.Correction of the lubrication port
Revision place
*The drain bolt or the plug of | 4. J4 axis |
lubrication port | |
all the axes were erased. |
|
|
|
5. J5 axis lubrication port
6. J6 axis lubrication port
3. J3 axis lubrication port
A
1. J1 axis lubrication port
2.J2 axis lubrication port
