Mitsubishi Electronics RV-6S Selecting the origin setting method, Selecting a menu

2Unpacking to Installation

(4) Selecting the origin setting method

<T/B screen>			[Keys used]
<MENU>
1.TEACH 2.RUN				+C
3.FILE		4.MONI
				(J6)
5.MAINT		6.SET	5	STU
<MAINT>
1.PARAM 2.INIT
3.BRAKE		4.ORIGIN		-Y
				(J2)
5.POWER
			4	MNO
<ORIGIN>
1.DATA		2.MECH		-B	INP
3.JIG		4.ABS
			(J5)
					EXE
5.USER
			1	DEF
<ORIGIN>
SERVO OFF
OK?(1)				-B	INP
	1:EXECUTE		(J5)		EXE
			1	DEF

<DATA>D(000000) 1:000000 000000 3:000000 000000 5:000000 000000

1)Press the [5] key on the menu screen, and display the maintenance screen.

2)Press the [4] key on the maintenance screen, and display the origin setting method selection screen.

3)Press the [1] key on the origin setting method selection screen, and select the data input method.

The origin data input method will be selected, and the screen for turning OFF the servo power will appear.

4)Press the [1] and [INP] keys to turn OFF the servo power. The screen for inputting the origin data will appear.

◇◆◇ Selecting a menu ◇◆◇

The menu can be selected with one of the following methods.

A:Press the numeral key for the No. of the item to be selected.

B:Using the [ ↓ ] and [ ↑ ] keys, etc., move the cursor to the item to be selected, and then press the [INP] key.

Setting the origin 2-15