4-40 Configuring Your Server

Setting Hot Spare

Install a hard disk drive

Run LSI Logic Software RAID Setup Utility

Set for hot spare.

Exit LSI Logic Software RAID Setup Utility

1.Install a hard disk drive to be used as hot spare, and then turn on the server.

2.Run LSI Logic Software RAID Setup Utility.

3.Select "Objects" → "Physical Drive" from the TOP menu.

The "Objects - PHYSICAL DRIVE SELECTION MENU" screen appears.

4.Move the cursor onto the hard disk drive to be used as hot spare and press Enter.

5.The "Port #X" screen appears. Select "Make HotSpare."

6.A confirmation screen appears. Select "Yes."

The hard disk drive indication is changed to "HOTSP."