2-22 General Description

When you fail to eject:

When you fail to eject the tray with the Open/Close button and take out the disc from the server, follow the procedure below.

1.Press the POWER switch to power off the server. (The POWER/SLEEP lamp goes off.)

2.Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length (a straightened large paper clip will make a substitute) into the emergency hole on the front of the DVD-ROM drive and gently push it in until the tray is ejected.

Emergency hole

IMPORTANT:

„Do not use a toothpick or plastic stick that is easy to break.

„If the above procedure does not let you take out the DVD/CD-ROM, contact your service representative.

3.Hold the tray and pull it out.

4.Take out the disc.

5.Push the tray back into position.