NEC 5800/230Eh 4-18Configuring Your Server

4-18 Configuring Your Server

Option	Parameter	Description	Your Setting
Parallel ATA	Disabled	Selects whether the parallel ATA is
	[Enabled]	enabled or disabled.
Serial ATA	Disabled	Selects whether the serial ATA is
	[Enabled]	enabled or disabled.
SATA Controller	[Compatible]	This menu is available only when
Mode Option	Enhanced	"Serial ATA" is enabled.
		Selects the SATA Controller Mode
		Option on mother board.
		"Compatible": Automatically detects
		SATA hard disk drive and controls it as
		the normal hard disk drive.
		"Enhanced": Automatically detects
		SATA hard disk drive and controls it in
		native IDE mode.
SATA AHCI	[Disabled]	This option is available only when
	Enabled	"Enhanced" is set for "SATA Controller
		Mode Option".
		Selects whether the SATA AHCI is
		enabled or disabled.
SATA RAID	[Disabled]	This option is available only when
	Enabled	"Enhanced" is set for "SATA Controller
		Mode Option".
		Selects whether the RAID disk drives
		that uses the onboard SATA is
		enabled or disabled.
		Note: If you attempt to start the system
		from SATA hard disk drive with
		different setting, the data may be
		destroyed.
		[	]: Factory-set