Installing the Operating System with Express Setup 5-11

10.Next, [Basic Information] wizard appears. Confirm the parameters, modify if necessary, and then click [Next].

After that, click [Next], [Back], or [Help] on the screen to continue. Modify the parameters each time if necessary.

IMPORTANT:

„Reserve the partition to install the OS more than the minimally required size.

„If you select "Use Existing Partition" at "System Partition", the information included in the first partition (excluding maintenance partition) will all be formatted and deleted. The information included in the other partition will be retained. In the figure below, describes the partition which information will be deleted when maintenance partition exists.

First Partition

Second

Third

Fourth

<Maintenance Partition>

Partition

Partition

Partition

Retained

Deleted

Retained

Retained

„You can not re-install the system with the existing partition that is upgraded to Dynamic Disk remained. Do not select "Use Existing Partition" at "System Partition".

„If you specify other than 4095MB for the "Installing Partition", it is necessary to convert to NTFS.

„If "Use Existing Partition" at "System Partition" is selected but the partition other than the one to install Windows Server 2003 does not exist (excluding maintenance partition), Express Setup will reserve the maximum area of the hard disk drive to install Windows Server 2003.

„You can not go to the next screen if the specification is incorrect.

„To specify the setup parameters, the number of characters must not exceed the limit as shown in the table below. (Double-byte character shall be counted as two characters.)

 

Item

Value specified

Max. number

 

 

of characters

 

 

 

 

 

 

Create Users

User Name

19

 

 

 

Group Name

20

 

 

 

Full Name

63

 

 

 

Explanation

47

 

 

Create Groups

Group Name

20

 

 

 

Explanation (Group Name)

47