NEC 5800/230Eh CPU, Keyboard, Security, Event Log, External Devices, Internal Devices

Configuring Your Server 4-7

CPU

To check the installed CPU status

Select [Main] - [Processor Settings] and check the status indications.

The on-screen processor numbers and socket locations on the motherboard are associated as shown in the figure on the previous page.

To clear the CPU error information

Select [Main] - [Processor Settings] - [Processor Retest] – [Yes] and reboot.

Keyboard

To set Numlock

Select [Advanced] - [Numlock] – [On]/[Off].

Event Log

To clear event logs

Select [Server] - [Event Log Configuration] - [Clear all Event Logs], press Enter, and select [Yes].

Security

To set passwords on the BIOS

Select [Security] - [Set Supervisor Password] and enter a password.

Select [Security] - [Set User Password] and enter a password.

Set Supervisor password first, then User password.

External Devices

To set up external devices

Select [Advanced] - [Peripheral Configuration] and set up each device.

Internal Devices

To install the disk array controller board or SCSI controller board

Select [Advanced] - [PCI Configuration] - [PCI Slot n Option ROM] - [Enabled]. n: slot number

To clear the hardware configuration data (after installing/removing internal devices)

Select [Advanced] - [Reset Configuration Data] - [Yes].