NEC 5800/230Eh manual DIMM

Upgrading Your Server 9-33

DIMM

The DIMM (Dual Inline Memory Module) is installed in a DIMM socket on the mother board installed in the server.

Up to 24GB (4GB × 6) of memory can be added.

IMPORTANT:

„The DIMM is easily affected by static electricity. Handle the DIMM after making your body contact with a metallic frame section of the server to discharge the static electricity on your body. Do not make bare hands contact with terminals and components on the DIMM. In addition, do not put the DIMM on a desk directly. See "Static Precautions" for details of the static electricity.

„Do not use any DIMM not approved by NEC. If an unapproved third party's DIMM is installed in the server, not only the DIMM but also the server itself may be defected. You will be charged by any repair of a malfunction or defect caused by such a device within the warranty period.

DIMM #B-3

DIMM #B-2

DIMM #B-1

DIMM #A-3

DIMM #A-2

DIMM #A-1

REAR FRONT

Mother board

The mother board in your server supports the dual channel memory configuration. The dual channel memory configuration increases data transfer rate.