NEC 5800/230Eh Memory Configuration, 4-14Configuring Your Server

4-14 Configuring Your Server

Memory Configuration

The following screen appears if you select "Memory Configuration" on the Advanced menu.

See the table below for the items.

Option	Parameter	Description	Your Setting
System	–	Indicates the total capacity of the base
Memory		memory. (View only)
Extended	–	Indicates the total capacity of the memory
Memory		available for OS. (View only)
DIMM Group	Normal	Indicates the current memory status. (View
#1 Status	Disabled	only)
DIMM Group	Not installed	"Normal" indicates that the memory devices
#2 Status		operate normally.
DIMM Group		"Disabled" indicates that one or more memory
#3 Status		devices are defected.
		"Not Installed" indicates that no memory
		devices are installed.
		On-screen group numbers and DIMM
		slockets on mother board are associated as
		follows.
		Group #1: DIMM #A-1, #B-1
		Group #2: DIMM #A-2, #B-2
		Group #3: DIMM #A-3, #B-3
		Each group is composed of two DIMMs of
		interleave type.
Memory	[No]	If you select [Yes], BIOS will clear historical
Retest	Yes	memory status and retest all the DIMMs on
		the next boot. This parameter is automatically
		reset to "No" at the next boot.
Extended	1MB	Specify whether to execute a memory test for
RAM Step	1KB	extended memory or not. If the test is
	Every location	executed, specify the block size.
	[Disabled]
Sparing	[Disabled]	Specify whether to enable or disable online
	Enabled	spare memory feature.
		[	]: Factory-set