2-20 General Description

Power Off

Follow the procedure below to power off the server. If the power cord of the server is connected to a UPS, refer to the manual that comes with the UPS or the manual for the application that controls the UPS.

IMPORTANT: Always allow POST to complete before turning off the server.

1.Shut down the OS.

2.Press the POWER/SLEEP switch on the front of the server. The POWER/SLEEP lamp goes out.

3.Power off peripheral devices.

NOTE: The standby function of Windows Server is not available. Do not select "Standby" in the Windows shutdown menu.

SLEEP Switch

The POWER/SLEEP switch allows you to save almost all power of the server (power-saving mode or sleep mode).

Press the POWER/SLEEP switch on the front of the server to place the server in the power-saving mode. (The POWER/SLEEP lamp blinks.) In the power-saving mode, the server retains the memory data and the status of the previous operations.

To resume the original state, press the POWER/SLEEP switch again. (It may take a little time to resume the original state.)

NOTE: The operational level in the power-saving mode depends on the OS in use. (Available for Windows Server 2003.)