Installing Windows Server 2003 x64 Editions D-7

7.Select the proper SCSI Adapter and press Enter.

[LSI Logic MegaRAID SAS RAID Controller Driver (Server 2003 for x64)] (When N8103-91 board is installed.)

[LSI Logic MegaRAID SAS RAID Controller Driver (Server 2003 for x64)] (When N8103-99 board is installed.)

[Promise SuperTrak EX Series Controller-x64 platform] (When N8103-101 board is installed.)

[LSI MegaRAID Software RAID (Windows XP/2003 64-bit)] (When LSI Logic Embedded MegaRAID is used.)

Continue performing tasks according to the subsequent messages that appear.

8.When the following message is shown, press Enter to start "Welcome to Setup".

9.When the installation of Windows Server 2003 x64 Edition has finished, the system reboots automatically.

10.The [Windows Setup] screen will be displayed after logged on to the system.

IMPORTANT:

„In this case, the [Windows Setup] screen may not be displayed. Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 according to the following procedures.

„You can install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 after the application of "System update".

Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2.

In this case, note that the [Windows Setup] screen is not displayed.

11.Insert Microsoft Windows Server 2003 R2 x64 Edition DISC 2 CD-ROM into the DVD- ROM drive.

Confirm the parameters and click [OK].