NEC 5800/230Eh Enter, Peripheral Configuration

Configuring Your Server 4-17

Peripheral Configuration

The screen shown below appears if you select "Peripheral Configuration" on the Advanced menu. If you select a menu item preceded by symbol and press Enter, the appropriate submenu appears.

See the table below for the items.

IMPORTANT: Note that the interrupt and/or base I/O address does not conflict with others. If the value set for the interrupt or base I/O address is used in another resource, the yellow asterisk (*) appears. Reassign any item with the yellow asterisk properly.

Option	Parameter	Description	Your Setting
Serial Port A	Disabled	Selects whether serial port A is
	[Enabled]	enabled or disabled.
Base I/O address	[3F8]	Selects the base I/O address for serial
	2F8	port A.
	3E8
	2E8
Interrupt	IRQ 3	Selects the interrupt for a serial port A.
	[IRQ 4]
Serial Port B	Disabled	Selects whether serial port B is
	[Enabled]	enabled or disabled (display only).
Base I/O address	3F8	Selects the base I/O address for serial
	[2F8]	port B.
	3E8
	2E8
Interrupt	[IRQ 3]	Selects the interrupt for a serial port B.
	IRQ 4
USB 2.0 Controller	Disabled	Selects whether the USB 2.0 device is
	[Enabled]	enabled or disabled.