6-8 Installing and Using Utilities

„System Management

The parameters of BMC (Baseboard Management Controller) are set for remote control and alert.

„BIOS/FW/etc. Update

This menu allows you to update the software module such as BIOS and firmware of the server by using the update disk (3.5-inch floppy disk) that is distributed from NEC customer service representative.

After rebooting the system, an update program is started automatically from the floppy disk, and the various BIOS and firmware programs are updated.

IMPORTANT: Do not turn off the server while the update program is running. If the update processing is discontinued, the system becomes unable to start.

„Help

Displays explanations about various functions of NEC EXPRESSBUILDER.

„Return to the Top Menu

Choosing this menu returns to the Top Menu.