NEC 5800/230Eh 4-24Configuring Your Server, If the server is connected to the UPS, set at least 10 seconds delay in the

4-24 Configuring Your Server

Option	Parameter	Description	Your Setting
Power on Delay	[0] - 255	Specify the DC power on delay
Time		time within the range between 0
		and 255 seconds. The time
		specified is valid when "Power On"
		or "Last State" is specified for AC
		LINK.
Platform Event	Disabled	This item becomes meaningless
Filtering	[Enabled]	when the notification feature of
		EXPRESSSCOPE Engine is
		enabled.
		[	]: Factory-set

The table below shows the operation when the AC power to the server is turn off once and then on again, depending on the setting of "AC LINK."

System status before AC power off	Setting of AC LINK
	Stay Off	Last State	Power On
Operating	Off	On	On
Aborting (DC power being off also)	Off	Off	On
Forced shutdown	Off	Off	On

* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.

IMPORTANT:

„To power on the server from the UPS (Uninterruptible Power Supply), select [Server] - [AC Link] - [Power On].

„If the server is connected to the UPS, set at least 10 seconds delay in the power-on schedule.