3-4 Setting Up Your Server

SELECTING SERVER SITE

Read the following precautions before selecting a suitable site for your server. The following describes installation of the server and connections to the server.

CAUTION

Observe the following instructions to use the server safely. Failure to follow these instructions may cause a fire, personal injury, or property damage. See pages 1-3 to 1-8 for details.

■Never attempt to lift the server only by yourself.

■Do not install the server in any place other than specified.

The following figure illustrates a site suitable for installing the server.

Allow clearance of at least 150 mm in

front of and behind the server.

Close enough to connect the

mouse and the display.

Room that satisfies the following conditions: * <While operating> Temperature: 10 to 35ºC

Humidity: 20 to 80%

Temperature gradient: ±10ºC/h

Atmosphere: 749 to 1040 hpa <While halting> Temperature: –10 to 55ºC Humidity: 10 to 80% Temperature gradient: ±15ºC/h Atmosphere: 749 to 1040 hpa

The server must be fixed with stabilizers.

100 to 120 Vac/200 to 240

Clean and tidy room

 

Vac parallel bi-polar wall

 

power outlet with the

 

ground line.

 

Install the server on

a flat, rigid desk

*It is recommended that the server should be used in a room where temperature is in the range between 15 to 25ºC.