NEC 5800/230Eh manual 85

Configuring Your Server 4-21

See the table below for the items.

Option	Parameter	Description	Your Setting
Supervisor	Clear	Indicates the password setting status.
Password Is	Set
User Password Is	Clear	Indicates the password setting status.
	Set
Set Supervisor	Up to eight	Press Enter to display the supervisor
Password	alphanumerics	password entry screen. This password
		enables all the SETUP menus to be
		accessed. This setting can be done
		only on login with the password input
		of "Supervisor" at start of SETUP.
Set User	Up to eight	Press Enter to display the user
Password	alphanumerics	password input screen. For this
		password, accessing to the SETUP
		menu is restricted.
Password on boot*	[Disabled]	Specify whether the passwords are
	Enabled	entered or not on booting. At first the
		supervisor password must be set. If
		the supervisor password is set and
		this option is disabled, BIOS
		determines that a user is booting.
Fixed disk boot	[Normal]	Specify whether to permit writing into
sector	Write Protect	boot sector of the hard disk drive or
		not.
Power Switch	[Disabled]	Specify whether to enable or disable
Inhibit	Enabled	the power switch feature.
		[	]: Factory-set

* You can set this item on [Set Supervisor Password] menu.