4-34 Configuring Your Server

Operating Procedures for Setup UtilityCreating/Adding Configuration

Run LSI Logic Software RAID Setup Utility

Set new configuration information (pack/logical drive settings)

Check the logical drive settings

Initialize logical drive

Perform Consistency Check

Exit LSI Logic Software RAID Setup Utility

1.Run LSI Logic Software RAID Setup Utility.

2.Select "Configure" → "New Configuration" from the TOP menu (Management Menu). Select "View/add Configuration" to add configuration.

IMPORTANT:

„Creating a configuration using "New Configuration" menu clears the existing configuration information. To add configuration information to the existing configuration, select "View/add Configuration."

„You cannot create Spanning of RAID1 or set the logical drive capacity on "Easy Configuration" menu.

Use "New Configuration" or "View/Add Configuration" instead.