5-12 Installing the Operating System with Express Setup

NOTE: If you press F9 in [Role of Computer], the installation will be done using the default values of Express Setup for the subsequent settings automatically. (Only when the [OK] is displayed in the lower right of the screen).

11.Copy the modules for the optional mass storage driver.

If you want to install the optional mass storage driver, insert the floppy disk attached to mass storage driver into the floppy disk drive and follow the message to operate the installation.

NOTE: You can use this function only when the floppy disk drive is attached to the system.

12.Remove the NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive according to the message.

If you proceed the setup by using setup parameter file, remove the floppy disk from the floppy disk drive.

Insert Windows Server 2003 CD-ROM into the DVD-ROM drive. [Agree Software License Agreement] screen appears.

13.Read the agreement carefully and click [I agree.] or press F8 if you do agree. If you do not agree, click [I disagree] or press F3.

IMPORTANT:

„If you do not agree to this agreement, the setup terminates and Windows Server 2003 will not be installed.

„If "NetWare Gateway (and Client) Service" is specified to install, the window to specify the details of "NetWare Gateway (and Client) Service" pops up on the first logon. Specify the appropriate value.

14.If you selected [Yes] on [Apply Service Pack] at Basic Information, follow the procedure below.

1)Follow the message to take Windows Server 2003 CD-ROM out of the DVD-ROM drive.

2)Follow the message to insert Windows Server 2003 Service Pack 1 or later into the DVD-ROM drive.

Windows Server 2003 and the specified application will be installed automatically and logon to the system. Install and configure the device drivers.