5-18 Installing the Operating System with Express Setup

Optional Network Board Driver

If you want to utilize optional Network Board (N8104-112/119/111/86/120/121), the network driver will be installed automatically. Therefore, the driver attached to the Network board should not be used.

If you want to utilize optional Network Board (N8104-86/111), install the driver stored in NEC EXPRESSBUILDER CD-ROM.

In case of utilizing (N8104-86/111)

"DVD-ROM Drive Letter:\WINNT\DOTNET\NS4\PRO100\WS03XP2K" In case of utilizing (N8104-112/119/120/121)

"DVD-ROM Drive Letter:\WINNT\DOTNET\NS4\PRO1000\WS03XP2K"

If the procedure of installation is not clear, refer to the installation procedure described in the section "Installation of the Optional Network Board Driver".

Installation of the Optional Network Board Driver

1.Start Device Manager.

2.Click [Network adapters] and Double-click [(Network Adapter Name)]. [(Network Adapter Name) Properties] appears.

NOTE: [(Intel(R) PRO/1000...)] is the name of On-Board adapter. All other names show the Optional Network Board.

3.Click [Driver] tab and click [Update Driver...]. [Hardware Update Wizard] appears.

4.Select the [Install from a list or specific location(Advanced)] radio button and click [Next].

5.Select the [Search for the best driver in these locations] radio button and check off the [Search removable media (floppy, CD-ROM...)] check box.

6.Check the [Include this location in the search] check box and when using [(N8104- 86/111)], specify

[DVD-ROM Drive Letter:\WINNT\DOTNET\NS4\PRO100\WS03XP2K]. Then click [Next].

When using [(N8104-112/119/120/121)], specify

[DVD-ROM Drive Letter:\WINNT\DOTNET\NS4\PRO1000\WS03XP2K]. Then click [Next].

7.Click [Finish].