9-54 Upgrading Your Server

Additional HDD Cage

The N8154-09 additional HDD cage (called HDD cage) is dedicated to the server. It can contain four SATA hard disk drives to configure a disk array. The hard disk drives can be removed or replaced with the server being powered on (hot-swap feature).

Installation

Install the HDD cage in the following procedure.

1.See the section "Preparing for Installation and Removal" described earlier to prepare.

2.Remove the left side cover according to the section "Front Mask" described earlier in this chapter and open the front mask.

3.Disconnect the interface cable and power cord from the hard disk drive if connected.

4.Remove two screws on the front panel securing the hard disk drive carrier.