Switching Commands
192
ProSafe M4100 and M7100 Managed Switches
Example: The following shows example CLI display output for the command.
(Switch) #show lldp med remote-device detail 0/8
Device Class Shows the device class as advertized by the device remotely connected to the port.
Network Policy
Information Shows if network policy TLV is received in the LLDP frames on this port.
Media
Application
Type
Shows the application type. Types of applications are unknown, voice, voicesignaling,
guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo,
videosignaling.
VLAN Id Shows the VLAN id associated with a particular policy type.
Priority Shows the priority associated with a particular policy type.
DSCP Shows the DSCP associated with a particular policy type.
Unknown Indicates if the policy type is unknown. In this case, the VLAN id, Priority and DSCP are
ignored.
Tagged Indicates if the policy type is using tagged or untagged VLAN.
Hardware
Revision Shows the hardware version of the remote device.
Firmware
Revision Shows the firmware version of the remote device.
Software
Revision Shows the software version of the remote device.
Serial Number Shows the serial number of the remote device.
Manufacturer
Name Shows the manufacture name of the remote device.
Model Name Shows the model name of the remote device.
Asset ID Shows the asset id of the remote device.
Sub Type Shows the type of location information.
Location
Information Shows the location information as a string for a given type of location id
Device Type Shows the remote device’s PoE device type connected to this port.
Available Shows the remote port’s PSE power value in tenths of a watt.
Source Shows the remote port’s PSE power source.
Priority Shows the remote port’s PSE priority.
Required Shows the remote port’s PD power requirement.
Source Shows the remote port’s PD power source.
Priority Shows the remote port’s PD power priority.
Term Definition