NETGEAR capture remote port, capture file size, capture line wrap

Utility Commands
582
ProSafe M4100 and M7100 Managed Switches
no capture
Use this command to reset the capture mode to remote mode.
Format no capture
Mode
capture remote port
Use this command to configure file capture options. The command is persistent across a
reboot cycle.
Default
Format capture remote port <port-id>
Mode
no capture remote port
Use this command to reset the remote port to the default (2002).
Format no capture report port
Mode
capture file size
Use this command to configure file capture options. The command is persistent across a
reboot cycle. The range is from 2 to 512 Kbytes.
Default
Format capture file size <file-size>
Mode
no capture file size
Use this command to reset the file size to the default (512Kbytes).
Format no capture file size
Mode
capture line wrap
There are two methods to configure capturing CPU packets into RAM: capture line
wrap and no capture line wrap. Use the capture line wrap command to stop
automatically capturing packets when 128 packets are saved and have not yet been
Global Config
2002
Global Config
Global Config
512Kbytes
Global Config
Global Config