Management Commands
704
ProSafe M4100 and M7100 Managed Switches
network ipv6 address
Use this command to configure an IPv6 global address, enable or disable stateless global
address autoconfiguration, and enable or disable dhcpv6 client protocol information for the
network port. You can configure multiple IPv6 addresses on the network port.
Format network ipv6 address {address/prefix-length [eui64] | autoconfig |
dhcp}
Mode
address
prefix-length
eui64
autoconfig
dhcp
no network ipv6 address
Use this command to:
Remove the manually configured IPv6 global address on the network port interface (with
the address option).
Disable the stateless global address autoconfiguration on the network port (with the
autoconfig option).
Disable the dhcpv6 client protocol on the network port (with the dhcp option).
Format no network ipv6 address {address/prefix-length [eui64] | autoconfig
| dhcp}
Mode
network ipv6 gateway
Use this command to configure IPv6 gateway (default routers) information for the network
port. The gateway address is in IPv6 global or link-local address format.
Format network ipv6 gateway <gateway-address>
Mode
Privileged EXEC
Term Definition
IPv6 prefix in IPv6 global address format.
IPv6 prefix length value.
Formulate IPv6 address in eui64 format.
Configure stateless global address autoconfiguration capability.
Configure dhcpv6 client protocol.
Privileged EXEC
Privileged EXEC