NETGEAR authorization network radius, radius accounting mode, radius server attribute

Management Commands
681
ProSafe M4100 and M7100 Managed Switches
authorization network radius
Use this command to enable the switch to accept VLAN assignment by the radius server.
Default
Format authorization network radius
Mode
no authorization network radius
Use this command to disable the switch to accept VLAN assignment by the radius server.
Format no authorization network radius
Mode
radius accounting mode
Use this command to enable the RADIUS accounting function.
Default
Format radius accounting mode
Mode
no radius accounting mode
Use this command to set the RADIUS accounting function to the default value (disabled).
Format no radius accounting mode
Mode
radius server attribute
Use this command to specify the RADIUS client to use the NAS-IP Address attribute in the
RADIUS requests. If the specific IP address is configured while enabling this attribute, the
RADIUS client uses that IP address while sending NAS-IP-Address attribute in RADIUS
communication.
Format radius server attribute <4> [<ipaddr>]
Mode
disable
Global Config
Global Config
disabled
Global Config
Global Config
Global Config
Term Definition
4NAS-IP-Address attribute to be used in RADIUS requests.
ipaddr The IP address of the server.