IPv6 Multicast Commands
433
ProSafe M4100 and M7100 Managed Switches
sent on that interface. The range for <query-max-response-time> is 0–65,535
milliseconds.
Default
Format ipv6 mld query-max-response-time <query-max-response-time>
Mode
no ipv6 mld query-max-response-time
This command resets the MLD query max response time for the interface to the default
value.
Format no ipv6 mld query-max-response-time
Mode
ipv6 mld last-member-query-interval
Use this command to set the last member query interval for the MLD interface, which is the
value of the maximum response time parameter in the group-specific queries sent out of this
interface. The range for <last-member-query-interval> is 1 - 65,535 milliseconds.
Default
Format ipv6 mld last-member-query-interval <last-member-query-interval>
Mode
no ipv6 mld last-member-query-interval
Use this command to reset the <last-member-query-interval> parameter of the
interface to the default value.
Format no ipv6 mld last-member-query-interval
Mode
ipv6 mld last-member-query-count
Use this command to set the number of listener-specific queries sent before the router
assumes that there are no local members on the interface. The range for
<last-member-query-count> is 1–20.
Default
Format ipv6 mld last-member-query-count <last-member-query-count>
Mode
10000 milliseconds
Interface Config
Interface Config
1000 milliseconds
Interface Config
Interface Config
2
Interface Config