NETGEAR show interface priority-flow-control

Switching Commands
212
ProSafe M4100 and M7100 Managed Switches
VLAN tagging must be enabled to carry the 802.1p value through the network. The number of
lossless priorities supported is 2. Additionally, the mapping of class-of-service levels to
802.1p priority values to must be set to one-to-one.
Format priority-flow-control priority priority-list {drop | no-drop}
Mode
Default
show interface priority-flow-control
This command displays a summary of the priority flow control configuration for a specified
interface or all interfaces.
Format show interface priority-flow-control [interface <slot/port>]
Mode
(Switch) #show interface priority-flow-control
Port Drop No-Drop Operational
Priorities Priorities Status
------ --------------- --------------- -----------
0/1 0-7 Inactive
0/2 0-7 Inactive
Interface Config
drop
Privileged EXEC