Log Messages
729
ProSafe M4100 and M7100 Managed Switches
Stacking

Table 51. PIM-DM Log Messages

Component Message Cause
PIM-DM Out of memory when creating xxx This message is logged when there is
insufficient memory to accommodate a new
neighbor/(S,G) Entry, Prune, Graft, Join
etc.
PIM-DM Error entry->ll_xxx LL creation error This message is logged when the SLL
creation is Failed.
PIM-DM pim_interface_set: Could not give
taskSema This message is logged when Task
synchronization Semaphore release fails.
PIM-DM Error initializing CACHE This message is logged when the PIM-DM
(S,G) entry Cache table initialization fails.
PIM-DM Error creating PIM-DM pipe This message is logged when the PIM-DM
Pipe (that receives control messages)
creation fails.

Table 52. DVMRP Log Messages

Component Message Cause
DVMRP dvmrp_send_graft: failed getting memory
for graft Failed to allocate memory while sending a
graft
DVMRP dvmrp_register_neighbor: failed getting
memory for nbr Failed to allocate memory while registering
a neighbor
DVMRP dvmrp_recv_prune: failed getting memory
for prune Failed to allocate memory while receiving a
prune
DVMRP dvmrp_new_route: failed getting memory
for route Failed to get memory for a new route entry
DVMRP dvmrp_prepare_routes: failed getting
memory for dvmrp_ann_rt Failed to get memory while announcing a
new route entry

Table 53. EDB Log Message

Component Message Cause
EDB EDB Callback: Unit Join: <num>. Unit <num> has joined the stack.