Log Messages
727
ProSafe M4100 and M7100 Managed Switches
Multicast

Table 45. RIP Log Message

Component Message Cause
RIP RIP : discard response from xxx via
unexpected interface When RIP response is received with a
source address not matching the incoming
interface’s subnet.

Table 46. DHCP6 Log Message

Component Message Cause
DHCP6 relay_to_server: Cannot relay to relay
server intf xxx: not IPv6 enabled Relay is enabled but neither the outgoing
interface nor the server IP address is
specified.

Table 47. Cache Log Messages

Component Message Cause
Cache Out of memory when creating entry. When we run out of memory while creating
a new cache (MFC) entry
Cache Out of memory when creating cache. When we run out of memory while creating
the cache itself

Table 48. IGMP Log Messages

Component Message Cause
IGMP Error creating IGMP pipe
Error opening IGMP pipe
When we fail to create / open IGMP pipe for
Mcast control messages
IGMP Error creating IGMP data pipe
Error opening IGMP data pipe
When we fail to create / open IGMP data
pipe for Mcast data messages
IGMP Error getting memory for source record When we are unable to allocate memory for
a source record in the received IGMP V3
report
IGMP Failed getting memory for new group When we are unable to allocate memory for
a group record in the received IGMP
V3/V2/V1 report