Quality of Service (QoS) Commands
449
ProSafe M4100 and M7100 Managed Switches
show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a
specific interface. The slot/port parameter is optional and is only valid on platforms that
support independent per-port Class of Service mappings. If specified, the IP Precedence
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Format show classofservice ip-precedence-mapping [<slot/port>]
Mode
The following information is repeated for each user priority.
IP Precedence
Traffic Class
show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for the global
configuration settings.
Format show classofservice ip-dscp-mapping
Mode
The following information is repeated for each user priority.
IP DSCP
Traffic Class
show classofservice trust
This command displays the current trust mode setting for a specific interface. The
<slot/port> parameter is optional and is only valid on platforms that support independent
per-port Class of Service mappings. If you specify an interface, the command displays the
port trust mode of the interface. If you do not specify an interface, the command displays the
most recent global configuration settings.
Format show classofservice trust [<slot/port>]
Mode
Privileged EXEC
Term Definition
The IP Precedence value.
The traffic class internal queue identifier to which the IP Precedence value is mapped.
Privileged EXEC
Term Definition
The IP DSCP value.
The traffic class internal queue identifier to which the IP DSCP value is mapped.
Privileged EXEC